Our tired Core 2 Extreme X6800 processor is still cooled by a compressor cascade. Similar cooling was used on the X1900 XTX card while the cooling on the Radeon X1950 Crossfire has now been upgraded to liquid nitrogen. But the temperatures are far from extreme, the card has been cooled to mere -25°C. The reason is simply that Kinc hasn't voltmodded the card yet. Changing the voltage through software has turned out to cause great difficulties with the X1950 series. Thanks to the massive mousepot which was used with the X1950 Crossfire you can keep the temperature in good control when using liquid nitrogen, which of course tends for some nice results the coming days.
Yesterday another X1950 graphics card arrived in our test lab, a PowerColor X1950 XTX which together with the current Crossfire card and two beafy mousepots will make wonders. Kinc has no intention of stopping before ATI is the king of the 3Dmark06 hill and this despite the fact that ATI's graphics cards are not as fast with this tests than NVIDIA's equivalents. If everything goes as planned Kinc will be cooling the entire system with liquid nitrogen in a few days and then we will most likely have som mighty impressive results to show off. But 16 016 points is hardly something to be ashamed of when the next best ATI system is located at 13 804 points.
Specifications
CPU: X6800 @ 4685MHz
CPU cooling: Compressor cascade at -95°C
Master card: ATI X1950 CF @ 840/1143MHz (Mousepot LN2 at -25°C)
Slave card: ASUS X1900 XTX @ 882/873MHz (compressor cascade at -80°C
Memory: Corsair 6400C3 3-3-2-5 426MHz
Motherboard: ASUS P5W DH
PSU: Cooltek 600W
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
